Technical Introduction of the Product
False floors are prefabricated parts that are installed on the main floor of the building. It consists of three parts: the tile, the base and the stringer. (Of course, to meet safety standards, it is better to make these parts from refractory materials such as metals.)
Attributes
-
Earthquake resistant and safe
- High resistance to pressure and impact
- Non-flammable and prevents fire (tolerates heat stress well)
- Significant useful lifespan (if used properly)
- Completely hygienic and washable with detergents
- Do not absorbs dust particles
- No Significant dead load on the building, due to the installation of a false floor system (30 Kgf / m2)
- There is a possibility of a short circuit between all the metal parts of the false floor system, with the connection of the earth.
- Collect the entire system, transfer and install it elsewhere
Passing mechanical and electrical
It should be noted that by placing false floor tiles on the bases and stringers on the floors of the building, an integrated surface is created to the height predetermined on the main floor. (The height of this surface can vary from 10 to 150 cm). The resulting space between the main floor and the false floor can be mechanical and electrical appointments such as: hot and cold water pipes, hot and cold air, air ducts, electrical wires, telephone and audio, TV and satellite antennas, and so on. Passed.
Considering that each of the false floor tiles can be easily removed anywhere in the hall by the tile killer, so quick and easy access to all appointments under the false floor on all levels of the hall, without incurring costs and problems of demolition and reconstruction, And without the need for a specialist, it is easily possible and there will be no cost during the operation period.
Style of building weight
Assuming that in the normal case, mechanical and electrical appointments such as pipes and cables, etc., pass through the floor of the building and fill them with mineral wool and cover them with sand mortar and cement. If, instead of using this traditional method, they use the benefits of a false floor system, it will remove the mineral pores around the pipes and cables, and sand and cement mortar on them, and a significant amount of dead building load will be reduced.
This weight loss will reduce the load on the foundations, columns, beams, etc., and as a result, it will save materials, wages and the cost of the building.
Considering the evaluation and statements of experts and specialists in the construction industry and considering the background of the projects implemented in different regions of the country, today the false floor system is considered as the most suitable device for passing electrical and mechanical appointments and stylization and so on. Which reduces implementation costs and beyond (operating period). Another important issue that arises from this trend (stylization) is the increase in the building’s resistance to earthquakes.
Steel False Floor
Today, the office spaces of conference halls, exhibitions and commercial places are more and more used as multi-purpose. New technology has created the advantage that with the lowest cost, service infrastructure and communication infrastructure can be easily updated and the possibility of rapid exploitation of the latest technological phenomena and the resulting competitive advantages for organizations is possible. This type of false floor is produced in different thicknesses and heights with different types of load-bearing capacity to be able to meet the needs of most consumers. Type 6 false floor tiles are made of calcium sulfate composite reinforced with very high density fibers. With a low thickness, these tiles can be used for a very long time in very heavy working conditions without glare and looseness.
Aluminum False Floor
The company’s false floor panels are made of the best type of aluminum alloy. These panels are produced by dielectric method, which increases the density and also increases the resistance of the panels against the pressure of wide and concentrated loads. Another advantage of the company’s panels is their very accurate dimensions and flatness, which increases the speed, accuracy and beauty during installation. Different coatings such as vinyl flooring, vinyl granic, viniflex, LG flooring, thermic flooring, etc., depending on the customer’s choice. They are assembled on the panels with a special and strong hub adhesive.
Calcium sulfate
The company’s false floor panels are made of the best type of aluminum alloy. These panels are produced by dielectric method, which increases the density and also increases the resistance of the panels against the pressure of wide and concentrated loads. Another advantage of the company’s panels is their very accurate dimensions and flatness, which increases the speed, accuracy and beauty during installation. Different coatings such as vinyl flooring, vinyl granic, viniflex, LG flooring, thermic flooring, etc., depending on the customer’s choice. They are assembled on the panels with a special and strong hub adhesive.
This post is also available in: Persian
